Check Valves

China Casting Check Valve Manufacturer Landee Offers Casting Check Valve, 2 Inch (DN50), Material WCB, CS Valve, 150 LB, Siver Grey Surface Treatment.

China Flanged Swing Check Valve Manufacturer Landee Offers Swing Check Valves, BS 1868, Size 4 Inch, 300 LB, ASTM A216 WCB, Flanged RF Ends, API 598.

China Integral Check Valve Manufacturer Landee Supplies Integral Wafer Check Valves, Dual Plate, flanged End FF, 150LB, 36 Inch, ASTM B148 UNS C95800.

China Ductile Iron Check Valve Manufacturer Landee Provides Wafer Check Valves, DN350, Ductile Iron Body & Disc, EPDM Seat, SS410 Shaft, SS304 Spring.

China Wafer Check Valve Manufacturer Landee Offers Double Disk Check Valves, DN200, PN25, A216 WCB Body, SS304 Disc & Spring, EPDM Seat, SS410 Shaft.

China BS 1868 Swing Check Valve Manufacturer Landee Provides WCB Check Valves, Swing Type, Pressure 150 LB, 6 Inch, Flanged RF Ends, BS 1868 Granted.

China Carbon Steel Lug Check Valve Manufacturer Landee Provides ASTM A216 WCB Lug Check Valves, Dual Plate, Class 150, Flanged RF, 12 Inch, Trim 8.

China Dual Plate Check Valve Manufacturer Landee Offers API 594 ASTM B148 Wafer Check Valves, 8 Inch, 150 LB, Aluminum Bronze Disc & Pin, Flanged FF.

China Wafer Check Valve Manufacturer Landee Supplies Cast Iron Wafer Check Valves, DN 450, PN 16 Pressure, 152mm Dimension, SS304, NBR Seat, Epoxy Coated.

China Swing Check Valve manufacturer Landee provides BS 1868 Swing Check Valves, Full Bore, ASTM A216 WCB, Class 300, Flanged RF Ends, 13% CR Trim, 4 Inch.

China Piston Check Valve manufacturer Landee provides BS 5352 Carbon Steel Spring Piston Check Valve, body ASTM A105, F6 TRIM, 800 LB, ANSI B16.11 SW Ends.

China check valve manufacturer Landee supplies ASTM A216 WCB check valves with 13%CR trim, flanged RF connection ends, Class 150#, Size 36 inches.

Check Valves manufacturer Landee supplies AWWA C508 Cast Iron A 126 GR.B Swing Check Valves, with SS 420 stem, brass seat, 150 LB class rate, 1/2 - 2 inch.

Wafer Check Valve Manufacturer Landee supplies API, ANSI, BS, DIN Wafer Check Valves made from stainless steel, carbon steel, alloy steel, etc.

Swing Check Valve Manufacturer Landee supplies PN10, PN16, 125lb Swing Check Valves, ANSI125/150, DIN2501 PN10/PN16, and AS2129 Table E Flange Drilling.

Cast Steel Check Valve Manufacturer Landee supplies API, ANSI, BS, DIN, JIS Cast Steel Swing Check Valves made from stainless steel, carbon steel, ally steel, etc.

Standard Check Valve Manufacturer Landee supplies API Check Valves, ANSI, DIN , BS Check Valves made from carbon steel, alloy steel, stainless steel, etc.

Forged Steel Check Valve Manufacturer Landee supplies API, ANSI, BS, DIN, JIS Forged Steel Swing Check Valves with flanged, butt-welded Connection.

Dual Plate Check Valve Manufacturer Landee supplies Dual Plate Check Valves made from cast iron, ductile iron, aluminum bronze, stainless steel, carbon steel, etc.

Cast Iron Check Valve Manufacturer Landee supplies Cast Iron Swing Check Valves with Cast Iron, Ductile Iron, Aluminum Bronze, and Stainless Steel Materials

Water Check Valve Maufacturer Landee Supplies AWWA C508 Water Check Valves, Waste Water Swing Check Valves, with 125 LB TO 300 LB Working Pressure.

Aluminum Bronze Check Valve Manufacturer Landee Supplies Aluminum Bronze Wafer /Swing Check Valves, with wafer, lug, flanged Connection.